Difficulty: Easy

Time Required: Less than two hours.

Here's How:

• If your doll house is multi-storied doll house, concentrate on the first floor first.
• Decide where you will start the wiring, so that you can attach the junction slice to the house. It should be such a place from where wires can be run easily from transformers to junction slice.
• Try to run the wire along the wall so that it can be easily covered.
• Apply quality adhesive so that short circuit can be avoided.
• Plug the transformer into the wall socket
• Turn on the switch on the lead-in-wire.
• Put the load as per the capacity of the transformer.
• Once you are over with wiring and installing switches, bulbs, transformers, let the electricity run and see your doll house glowing.

Tips:

• Do all types of paintings and wallpapering before electric wiring.
• Don’t touch the adhesive side of the tape, as it will reduce the adhesive quality
• Always have the switch off while you are running tape or making connections, so that you will not cause a short.
• Plan to install more outlets than necessary in the beginning, because this will make the addition of more lights easier in the future.

What You Need:  

• Drill machine
• Transformers
• Adhesive Tapes
• Wires
• Wall Socket
• Battery